Rolling Machine

This machine is a special equipment to roll the plate into curve, cylinder, conical in the principle of three point circle.

W11S Upper Roller Universal Plate Rolling Machine

This machine is a special equipment to roll the plate into curve, cylinder, conical in the principle of three point circle.

Main Feature

  • The upper roller is designed as drum shape. Support roller install in the lower of bottom roller to help bending a perfect cylinder from thin to thick plate.
  • Special bending craft, high precision pre-bending of the edge, digital control for bending process.
  • Rich shape bend such as O, U, R etc.
  • Cone bending device for conical bend easily.
  • Whole chassis, simple ground foundation, it’s convenient to move the workplace. According to the role or requirement of customer, economic digital display type or TNC digital control type is optional.
  • CE certificate.

W11 Series Mechanical 3-Roller Rolling Machine

This machine is a special equipment to roll the plate into curve, cylinder, conical in the principle of three point circle.

Main Feature

  • Streamlined designed originated from EU, the use of the overall frame welding and annealing treatment;
  • Three-roller symmetric structure; driven by screw lever and turbine worm, the upper roller moves in vertical direction in the center symmetrical position between the lower two rollers; As the main drive roller for rotary motion, two lower rollers are engaged with the output gear of the reducer to provide torque for rolling plate. The machine is compact, easy operation and maintenance; besides, the roller is suitable for installation of profile dies for easy rolling of various profiles.
  • Easy-to-use removable console.
  • Two sets of digital output for easy positioning of two lower rollers.
  • Induction hardened forged rollers or high strength work rollers with SAE 1050 quality certificate.
  • Upper roller lifting motion principle: auxiliary motor and auxiliary reducer drive the worm and turbine under lateral bearing seats to move, consequently rotate the screw nut on the turbine to lift screw lever.
  • Unloading device: when finishing rolling work, the upper roller rises up, the pull rod on the end of upper roller holding the roller, then disconnects the left bearing seat namely tiltable bearing seat and extracts the pin shaft, turnover the tiltable bearing seat, finally, the finished ferrule will be released from the other end of the upper roller.